Industrial Products
Refractory Cement
Special Fire Cement
Refractory Mouldables
Aluma 80 Ram
Puram
Zircon M Ram/Patch
Refractory Castables
Preformed Shapes
Zircon Paint
Ceramic Fibres
Chemical Resistant Cement
Fire Bricks
Export
Technical Contacts
JETCEM D60 RAPID SETTING HIGH STRENGTH MORTAR
D60 is a special formulated sand/cement mix which is easy to use and trowel and designed to set hard in about 60 minutes.
D60 is satisfactory for even the most arduous conditions e.g. open to traffic within 2 hours. It has good bonding strength especially when used in conjunction with a P.V.A. primer which can also be used to advantage as a 10% addition to the mixing water.
D60 meets the DOT directive for Roads and Bridges HD 27/94 VOL 7 Sec. 2:
Mortars for bedding iron work such as manhole cover frames during repairs may be trafficked when the strength is expected to be 20 N/mm. For rapid construction this strength should be achieved within 2 hours.
TYPICAL APPLICATIONS FOR D60
Setting manhole frames
and street furniture.- Setting kerbstones.
- Setting handrails,
posts and signs.
- Filling cracks and
holes in walls and floors.
- Sealing joints in
drains and pipes, cracks and repairs to ponds and pools. Fish stock should be
protected by coating the repair with a suitable pool paint before re-filling.
- Repairing damaged
concrete, masonry, paths, steps, garage runways etc.
- Grouting bolts and
fixings.
- Sealing leaks in
tunnels, dams, mines and other excavations.
- Work on sea defences
between tides.
- Work in sub-zero
temperatures e.g. cold stores.
- PLEASE TELEPHONE, FAX OR
E-MAIL FOR FURTHER INFORMATION
ON ANY PRODUCT.